The washing machine is the reason why we get to wear clean clothes every day. Our lives would be a mess without them, quite literally. If you notice debris build-up around the washing machine door, it is about time that you cleaned it. Dust and dirt easily accumulate and take a toll on the cleanliness of the clothes and the machine’s performance. To avoid this from happening, you should take proper care of the machine. Whether you have a top-load machine or front-load machine, you can extend its life and ensure optimal performance through proper maintenance. This guide aims to help keep your washing machine in the best condition.

Cleaning a Top-Load Washer

The following steps will help you clean a top-load washer in no time.

  1. After you have removed all your clothes from the washer, leave the door open, and allow the washer to dry up when not using it. It helps prevent mildew and mould from growing inside it.
  2. Get a damp cloth and add some liquid antibacterial soap to it to wipe the inside of the washer.
  3. Wipe away the grime, spills, and dirt from the exterior and the door jam.

Maintenance Tips for a Top-Load Washer

One of the most important tips that you should keep in mind is that the hoses of the machine need to be changed every five years according to the recommendations set out by GE Appliances. It will help ensure that you do not have to contact an Appliance Repair specialist. Label the fill hoses and indicate the date when they should be replaced.

Make sure to use tide washing machine wipes to properly clean the washing machine every month. However, you should avoid using any harsh cleaners, especially ones that contain ammonia. Harsh cleaners end up damaging the machine. Hence, they should not be used. You can use white vinegar to lightly clean the machine but use it sparingly.

Cleaning a High-Efficiency or Front-Load Washer

  1. After you have removed the clothes, the door should be left ajar so that it can dry out when not in use. It prevents mould and mildew growth.
  2. Next, use a damp cloth to clean the washer. Use heavily diluted bleach or a bit of vinegar to remove dirt and dust build-up.
  3. Check for foreign objects by gently pulling back the seal. Look for dirt and stains. Remember, most rubber washer seals have outer and inner layers. Hence, they should both be inspected and cleaned. Objects can easily get stuck.

Washing machine cleaning wipes can be used for cleaning the build-up. You can even make a solution using water and bleach. Once you have cleaned the washer, you should leave it to air dry by leaving the door open for about an hour or two.

Conclusion

Besides just following the tips mentioned in this post, it is important that you contact a Washer Repair specialist for regular maintenance. The specialist will check to ensure that your washer is in perfect condition.