Guide to Washing Machine Repair

Washing machines are the most important appliance out there. They help ensure that we continue wearing clean clothes. Gone are the days when people used to use their hands to wash clothes. A washing machine is nothing less than a miracle. What can you do if it stops working or experiences issues? You might want to contact a technician or go at it alone. If you want to try repairing the washing machine on your own, this guide will come in handy. It looks at some of the easiest fixes. Before you take a look at the following tips, make sure to check if the washing machine is powered and properly plugged in.

  1. Grinding Noise

Nothing sounds worse than your washing machine making grinding noise. The last thing you need is to spend your weekend washing clothes and listening to such noise. This is why you should consider fixing the issue. All you need to do remove the pump to get to the bottom of the issue. Use the screwdriver to pop the snap retainers. Then, pull the pump off from the motor. Next, get the electrical connectors disconnected. If you have a whirlpool washer, you will need to replace the broken coupler.

  1. Draining Difficulties

To deal with draining difficulties, you will also need to replace the pump. Next, tip the washing machine back and place blocks underneath it for support. Have the pump belt and pump retaining screws removed to lift it up for an opening. Draining difficulties are normally caused by jewelry or clothing that gets stuck in the hose or the pump. This prevents the machine from draining and you might hear the sound of grinding or squealing every time you try to press on the drain button. All you have to do is remove the hose and check to see if anything is stuck. You can also open the blades to see if there is anything stuck there. If you smell burning rubber, you should consider hiring an Appliance Repair specialist.

  1. No Fill or Slow Fill

To fix this issue, you have to remove the water valve and replace it with a new valve. The existing water valve bracket might be preventing the water machine from filling up. You must transfer the electrical connectors to the new valve as well as the fill hose. Make sure to check the cleaning inlet to find out if there is a need for a deep clean.

  1. Does Not Spin

If the washing machine does not spin, you need to first remove the lid switch by sliding the locking tab forward and prying it up. A new switch might be required. Once the switch is open, you can set up the new switch and put it in place. On the other hand, if the machine tends to fill with water but sits there, you might need to fix the lid switch as it could be broken. Remove the wires and open the lid to replace the switch.


There is no denying that washing machine repair can be tough. However, the tips mentioned in this post will come in handy.