Top Three Tips for a Successful Bridge Inspection

Bridges are a key part of road transportation networks, making it possible to have new pathways where they seemed unlikely. On a regular day, there are a lot of people making use of bridges, so it is important to carry out an inspection on them frequently and prevent disastrous occurrences.

There are lots of things that should be in place before, during, and after inspection. But for a write-up as short as this, you’ll discover some tips that can aid a successful bridge inspection if you take them seriously.

Without further ado, the following bridge inspection tips will be discussed in the rest of this article:

  • Tip One: Understand The Type Of Bridge You Want To Inspect
  • Tip Two: Know The Right Time To Do The Bridge Inspection
  • Tip Three: Use The Right Bridge Inspection Equipment

Tip One: Understand The Type Of Bridge You Want To Inspect

Attempting to solve a problem without understanding it is counter-intuitive. In this vein, trying to inspect a bridge without having adequate knowledge of the type of bridge is a wrong approach.

For the average road user, all bridges may appear the same, but for bridge inspection personnel, this is far from the truth. Understanding the differences between popular types of bridges, such as Arch, Beam, Truss, and Cantilever bridges, is essential. To delve deeper into the specifics of beam bridges, for example, a beam calculator can be an invaluable tool for accurate analysis and assessment.

An understanding of the type of bridge influences a lot of choices, such as the type of bridge inspection equipment to be used. For example, a 22M and 18M under-bridge inspection vehicle are best suited for different bridges.

Many factors determine the use of different inspection types of equipment like the length, height, and width of the bridge as well as the forecasted load on it.

Tip Two: Know The Right Time To Do The Bridge Inspection

There’s always the right time for everything. When you understand this, you can get more effective results from all tasks, including bridge-inspection related ones.

There should be frequent checks on bridges, so potential wear and tear can be avoided. A lot of lives are on the line here, so it is only wise to check as often as possible. Aside from putting the lives of the road users at risk, doing a bridge inspection very late is also a threat to the life of the personnel in charge. Hence, preventive maintenance will go a long way in ensuring that disasters are avoided.

For bridges with huge traffic, bridge inspection should be done when lesser people will most likely be on the road. This ensures that the people experience less discomfort during the inspection process.

Tip Three: Use The Right Bridge Inspection Equipment

There are a lot of tools that go into the bridge inspection process, and it is important to choose the right one for the best result. Not all areas of a bridge will be easy to access, but with the help of the right bridge inspection equipment, it becomes possible without putting anybody’s life at risk.

With the help of the right tools, it is also easy to inspect any bridge thoroughly, as no area will be left untouched. In fact, the wrong tools can also harm the bridge as there can be lots of false positives and false negatives.

Conclusion

There you have it, three tips for a successful bridge inspection. But before I let you go, the three points raised in this article and every other hint to make an inspection process effective revolve around the use of the right bridge inspection equipment.

From experience, there are lots of under-bridge inspection equipment, and it is often hard to make the right choice. There’s the 22M platform type bridge inspection truck, there’s also the 16M bucket type bridge inspection equipment and a whole lot more.

For the most suitable tool for examining bridges, the Hangzhou Special Automobile is one of the most reliable bridge inspection vehicle manufacturers. They have different variants of these vehicles majorly platform type and bucket type to suit your demands. Of course, both 22M platform type bridge inspection truck and 16M bucket type bridge inspection equipment are available at Hangzhou Special Automobile.